Weldcraft Pvt Ltd.
No:72,industrial suburb,
2nd stage , Yeswantpur,
Tumkur road ,
Bangalore-560022
INDIA.
Mob: 93412 61762, 93435 19252
Email: sales@weldcraftindia.com
|
Welding Machines |
Maxi mig |
|
|
INTELLIGENT MACHINES |
- Excellent weld quality / Low spatters
- Self diagnostic design-advanced microcontrollers
- Temp. Controlled Fan
- Single phase prevention
- Thermal overload protection
- Perfect ignition due to soft start
- 100% copper wound transformer, choke
- Solid state PCB-Trouble free performance
- Low energy consumption / high efficiency
|
|
Maxi mig Intelligent Machines |
Weldcrafts brings to you new generation of intelligent MIG/MAG welding machines with advanced micro-controllers & self diagnostics to meet the professional requirements of the industry.
- The new MAXMIG series represents the uncompromised move towards performance & reliability in this demanding world.
- These simple & sturdy machines are easy to operate, easy in trouble shooting & offer excellent welding results on steel, stainless steel & aluminum metals.
- Temperature controlled cooling, where the fan operates only when required, reducing power consumption, noise & amount of air borne contamination into machine.
- Displays thermal overload protection along with the part that senses the overload. Helps prevent damage if the duty cycle is exceeded or airflow is blocked. Eases troubleshooting.
- Digital panel meters are fitted as a standard and easy to read at night and at a distance.
- The switch & PC boards are placed in a low dust compartment.
- 230VAC receptacle at the rear provides auxiliary power for heater.
- Specially designed transformer for low energy consumption / high power factor / high efficiency.
- Compact & sturdy wire-feeder for trouble-free performance.
|
Optional: Cylinder trolley / Water Cooling Unit / Water Cooled Torch / Auto-Darkening helmet accessories.
|
Specifications |
TECHNICAL DATA |
MAXIMIG 250 |
MAXIMIG 400 |
MAXIMIG 600 |
Input Supply |
415V/3(teta)/50Hz |
415V/3(teta)/50Hz |
415V/3(teta)/50Hz |
Fuse (Slow) A |
16 |
25 |
35 |
Input Power @ 60% KVA |
8.2 |
15.8 |
32 |
Open circuit voltage V |
17-38 |
18-50 |
21-56 |
Welding current range A |
40-300 |
60-440 |
70-600 |
Duty cycle 35%
60%
100% |
300A/29V
250A/27V
190A/24V |
440A/36V
400A/34V
310/30V |
600A/44V
480A/38V |
Cooling |
AF |
AF |
AF |
Insulation Class |
H |
H |
H |
Protection Class |
IP23 |
IP23 |
IP23 |
Voltage setting |
10 |
30 |
30 |
Operating modes |
2T/4T/SPOT |
2T/4T/SPOT |
2T/4T/SPOT |
Antistick |
Provided |
Provided |
Provided |
Spot Sec |
0.5-5.0 |
0.5-5.0 |
0.5-5.0 |
Digital Meter |
Provided |
Provided |
Provided |
Weight Kg |
85 |
130 |
200 |
Dimensions(LxBxH) mm |
640x340x640 |
745x400x700 |
950x500x830 |
|
|
|
|
|
|
|
|
Wire feeder |
2 - Roll |
2/4 - Roll |
2/4 - Roll |
Wire size mm |
0.8 – 1.2 |
0.8 – 1.6 |
0.8 – 2.4 |
Wire feed speed M/min |
1 – 20 |
1 – 23 |
1 – 23 |
Weight Kg |
11 |
11/14 |
11/14 |
Torch connection |
Euro connector |
Euro connector |
Euro connector |
|
In view of continuous development, design and specifications are subject to change without notice,
|
|
|
|
|
|
|
|
|
PlASMA CUT |
|
|
Plasma Cutter |
Plasma – cut Series Thyristor Plasma Cutters are designed for rugged use on the toughest cutting jobs and guarantee precise and clean cutting of all conductive metals including Mild Steel, Stainless Steel, and Aluminum making it ideal for fabrication, maintenance and automotive production jobs including mechanized cutting applications. |
- Central connector
- H.F. Ignition
- Stepless current regulation
- Thermal over load protection
- Line voltage compensation
- Filter & Regulator
- Contact cutting below 50A
- High power factor
|
|
Indications for:
- Low air pressure
- Torch Ready
- Over load
- Power
|
PLASMA – CUT120
- Designed for use in heavy steel structural works and also offer superior gouging capabilities.
- Auto identification of torch used and change of current of current range from 20-120A to 20-70A.
- Mist separator.
- Remote socket: for mechanized applications
|
|
Specifications |
TECHNICAL DATA |
PLASMA – CUT 70 |
PLASMA – CUT 120 |
Input Supply V |
400/3/50Hz |
400/3/50Hz |
Fuse (slow) A |
20 |
32 |
Max. Power KVA |
19 |
30 |
Current range A |
20 – 70 |
20 – 120 |
OCV V |
250 |
260 |
Duty Cycle (40 C) 60% |
70A / 108V |
120A / 128V |
Duty Cycle (40 C) 100% |
50A / 100V |
90A / 115V |
Clean Cut mm |
20 |
35 |
Separation mm |
25 |
45 |
Insulation Class |
H |
H |
Protection Class IP |
IP 23 |
IP 23 |
Type of cooling |
Forced Air |
Forced Air |
Compressed – air supply |
5.5 bar, 155 I/min |
5.5 bar, 210 I/min |
Dimensions LXBXH |
500 X 500 X 940 |
750 X 600 X 870 |
Weight Kgs. |
110 |
150 |
In view of continuous development, design and specifications are subject to change without notice |
OPTIONS:
Torch length 12 mts.
Machine mounted torch
Circle cutting attachment.
Fully auto carriage |
|
|
|
|
|
|
|
|
WELD ARC |
|
|
ARC WELDING SYSTEM |
Welding Transformers
- Class ‘H’ Insulation
- Excellent Arc Characteristics
- Natural Air – Cooled
- Rugged & Reliable
- Stepless Current Regulation
|
|
|
|
WELDARC – ARC WELDING MACHINES |
Weldcraft brings you the ultimate welding work-horse designed for handling the toughest production and maintenance welding jobs. These natural air-cooled welding transformers have Class ‘H’ insulation and stepless current regulation. They possess excellent arc characteristics, ensuring smooth and stable arc, better metal transfer, low spatter levels, excellent arc-striking (due to high OCV) and prevent electrodes from freezing due to their starting current surge. These features keep us a step above the rest. |
|
|
|
Specifications |
TECHNICAL DATA |
WT
225
|
WT/CTT
300
|
WT/CTT
400 |
WT/CTT
500 |
WT/CTT
600 |
Supply Voltage(V) |
220/440 |
380/440 |
380/440 |
380/440 |
380/440 |
Phase |
1 |
1/3 |
1/3 |
1/3 |
3 |
Frequency(Hz) |
50 |
50 |
50 |
50 |
50 |
Primary Switch Fuse Raiting (A) |
60/40 |
60/50 |
80/60 |
100/80 |
100 |
Duty Cycle |
50% |
60% |
60% |
60% |
60% |
Rated Power (KVA) |
9 |
16 |
21 |
30 |
39 |
Welding Current Range (A) |
50-225 |
60-300 |
70-400 |
80-500 |
80-625 |
O.C.V.(V) |
65 |
80 |
82 |
85 |
85 |
Max. Handwelding Current (A) |
225 |
300 |
400 |
500 |
600 |
Cooling |
Air |
Air |
Air |
Air |
Air |
Insulation Class |
H |
H |
H |
H |
H |
Approximate-Length (mm.)
Width (mm.)
Height (mm.) |
550
420
570
|
580/680
450
700 |
650/790
500
800
|
700/840
500
800
|
900
550
800
|
Weight (kg.) |
75 |
115/135 |
150/180 |
190/225 |
300 |
|
Please note:
- Towing handle provided from 300 A models onwards for easy maneuverability.
- Made also to IS & IPSS standards.
|
Our Other Products
- Welding Rectifiers
- Tig Welding Machines
- Submerged Arc Welding Machines
- Plasma Cutting Machines
|
In view of continuous development, design and specifications are subject to change without notice. |
|
|
|
More Products |
|
|
|
|